AC 85-265V 10A Portable Power Testerr Voltage Current Tester For 3 Hole AC Socket Input Interface
Tax included.
Description:
Using precise current, voltage sensor, microcomputer chip and special electric energy metering chip, the parameters can be read accurately, which can be used to test the power use of various power supply, instrument and equipment, and accurately grasp the power consumption data.
Specification:
1. Meet the standard: EN55032, EN55024
2. Working voltage range: AC 85-265V
3. The maximum test current: less than 10A
4. Frequency: 50-60Hz
5. Power consumption: 0.4W
6. Accuracy: Level 1
7. Shell material: environmental protection fire resistant ABS plastic
8. Size: 97.5 x 45 x 33.5mm (L x W x H)
9. Operating temperature: -20??- 60??br />
10. Storage temperature: -20??- 70??br />
11. Scope of application: it is suitable for the data test of the power equipment for the input interface of the shaped AC male socket
Test data:
1. Active power value (W)
2. Voltage value (V)
3. Current value (mA)
4. Electricity time (Days. Hours. Minutes)
5. Active power (degree)
6. Power factor
Operation mode:
1. The power wire is inserted into the input end of the power tester, and then the output end of the power tester is connected to the AC socket of the electrical equipment to be tested, and the display screen displays the corresponding test data.
2. Press the switch, the display turns the following data mode:
Active power value -- voltage value -- current value -- electricity time -- active power -- power factor
3. There is no button operation in 60 seconds, the LCD screen backlight is closed, the data is still displayed, the switch is pressed again, and the backlight is re lighted.
4. The test current limit value of tester is 10A, the current exceeds the limit value, and the tester backlight lamp flashes prompt. At this point, the tester should be stopped immediately to avoid the damage of the internal components.
Display mode:
Package included:
1 x Power tester
Using precise current, voltage sensor, microcomputer chip and special electric energy metering chip, the parameters can be read accurately, which can be used to test the power use of various power supply, instrument and equipment, and accurately grasp the power consumption data.
Specification:
1. Meet the standard: EN55032, EN55024
2. Working voltage range: AC 85-265V
3. The maximum test current: less than 10A
4. Frequency: 50-60Hz
5. Power consumption: 0.4W
6. Accuracy: Level 1
7. Shell material: environmental protection fire resistant ABS plastic
8. Size: 97.5 x 45 x 33.5mm (L x W x H)
9. Operating temperature: -20??- 60??br />
10. Storage temperature: -20??- 70??br />
11. Scope of application: it is suitable for the data test of the power equipment for the input interface of the shaped AC male socket
Test data:
1. Active power value (W)
2. Voltage value (V)
3. Current value (mA)
4. Electricity time (Days. Hours. Minutes)
5. Active power (degree)
6. Power factor
Operation mode:
1. The power wire is inserted into the input end of the power tester, and then the output end of the power tester is connected to the AC socket of the electrical equipment to be tested, and the display screen displays the corresponding test data.
2. Press the switch, the display turns the following data mode:
Active power value -- voltage value -- current value -- electricity time -- active power -- power factor
3. There is no button operation in 60 seconds, the LCD screen backlight is closed, the data is still displayed, the switch is pressed again, and the backlight is re lighted.
4. The test current limit value of tester is 10A, the current exceeds the limit value, and the tester backlight lamp flashes prompt. At this point, the tester should be stopped immediately to avoid the damage of the internal components.
Display mode:
Package included:
1 x Power tester