{"product_id":"ardupilot-arduplane-pitot-analog-airspeed-sensor-for-apm-pixhawk-flight-controller","title":"Ardupilot Arduplane Pitot Analog Airspeed Sensor for APM Pixhawk Flight Controller","description":"\u003cstrong\u003eArdupilot Arduplane Pitot Analog Airspeed Sensor for APM Pixhawk Flight Controller\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003eItem Name: Analog Airspeed Sensor\u003cbr\u003eVersion: APM Version \/ Pixhawk Version ( Optional)\u003cbr\u003eAPM Version is compatible with APM Flgiht Controller\u003cbr\u003ePixhawk Version is compatible with Pixhawk Flight Controller\u003cbr\u003e\u003cbr\u003e\u003cdiv\u003e\u003cspan style=\"color:#ff0000;\"\u003e\u003cstrong\u003eAnalog Airspeed sensor\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\u003cdiv\u003eThe way this airspeed sensor works is that the top tube is “active”\u003cbr\u003e(measures air pressure from the pitot tube that is open at the front and has air driven into it by airspeed)\u003cbr\u003eand the bottom one is “static” (measures ambient air pressure from tube with intakes on the side).\u003c\/div\u003e\u003cdiv\u003e \u003c\/div\u003e\u003cdiv\u003eConnect the active sensor port using silicon tube to the straight tube exiting from the rear of the pitot tube.\u003cbr\u003eThe angled tube is the static part connecting to the static port of the sensor (the port on the sensor closest to the PCB)\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color:#ff0000;\"\u003e\u003cstrong\u003eAPM\/Pixhawk Analog Airspeed Pin and Wiring\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong style=\"color: rgb(255, 0, 0);\"\u003e1. For Pixhawk\u003c\/strong\u003e\n\u003c\/div\u003e\u003cdiv\u003e-  The “airspeed” pin 15 is located on a 3 pin DF13 connector on the Pixhawk board.\u003c\/div\u003e\u003cdiv\u003e-  This pin can take voltages up to 6.6V (it has an internal voltage divider).\u003c\/div\u003e\u003cdiv\u003e-  The air pressure connector (labeled ADC 6.6V) is a 3 pin connector on the top right of the Pixhawk.\u003c\/div\u003e\u003cdiv\u003e-  Wire the airspeed sensor’s signal wire to pin 2 (the center pin) of the connector.\u003cbr\u003e\u003cdiv\u003e-  Wire pin 1 (towards the center of the board) to the sensors VCC (5 volts) input.\u003c\/div\u003e\n\u003cdiv\u003e-  Wire pin 3 (nearest the edge of the board) to the airspeed sensors ground.\u003c\/div\u003e\n\u003cdiv\u003e-  Assign the airspeed sensor to an appropriate “PIN” in Mission Planner - Configuration - Advanced Params - Adv Parameter List.\u003c\/div\u003e\n\u003cdiv\u003e-  Set the ARSPD_PIN parameter to 11 in the Advanced Parameter List and select “Write Parameters”.\u003c\/div\u003e\n\u003cbr\u003e\u003cspan style=\"color:#ff0000;\"\u003e\u003cstrong\u003e2. For APM \u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e- Plug it into the pins on the “A0” port.\u003c\/div\u003e\u003cdiv\u003e-  Assign the airspeed sensor to an appropriate “PIN” in Mission Planner - Configuration - Advanced Params - Adv Parameter List.\u003c\/div\u003e\u003cdiv\u003e-  Set the ARSPD_PIN parameter to 11 in the Advanced Parameter List and select “Write Parameters”.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003cdiv\u003e1x  Airspeed sensor Module \u003c\/div\u003e\n\u003cdiv\u003e1x  APm or PIXHAWK wire\u003c\/div\u003e\n\u003cdiv\u003e1x  3D Pringing Pitot Tube\u003c\/div\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/imgaz.staticbg.com\/images\/oaupload\/banggood\/images\/8B\/0A\/388ea815-fc9a-4687-af6a-d4b2c0b86a01.jpg\"\u003e\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/imgaz.staticbg.com\/images\/oaupload\/banggood\/images\/6D\/DE\/4a068d22-bddd-4dec-8261-70722129417b.jpg\"\u003e\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/imgaz.staticbg.com\/images\/oaupload\/banggood\/images\/38\/AC\/0f86ddf2-79fc-4210-9b77-9cfb74f58ed9.jpg\"\u003e\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/imgaz.staticbg.com\/images\/oaupload\/banggood\/images\/FF\/80\/a2069861-8aca-4d84-b150-c1153a7f18a7.jpg\"\u003e","brand":"Shopify","offers":[{"title":"APM version","offer_id":31700044218458,"sku":"1428589","price":1085.96,"currency_code":"ZAR","in_stock":true},{"title":"PIXhawk","offer_id":31700044251226,"sku":"","price":1085.96,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2787\/9162\/products\/388ea815-fc9a-4687-af6a-d4b2c0b86a01.jpg?v=1578059365","url":"https:\/\/electronic-pro-south-africa.myshopify.com\/products\/ardupilot-arduplane-pitot-analog-airspeed-sensor-for-apm-pixhawk-flight-controller","provider":"Electronic Pro ","version":"1.0","type":"link"}